Plastic injection
Model: |
Industry: |
Food industry |
|
Cooling equipment: |
Chiller, Mold, Materials tube, Oil cooler |
||
Condition: |
1. Tow sets injection machines (10 ton) 2. Open type cooling tower - 60RT, heat exchanger, mold and filler clogged with limescale in one year 3. To solve by SCT-30 |
Model: |
Industry: |
Tableware manufacturer |
|
Cooling equipment: |
Chiller, Materials tube |
||
Condition: |
1. Ten sets of hybrid electric and 20 full-electric injection machines 2. Chiller used to trip unexpectediy by limescale and it takes too mach time to clean it 3. To solve by SCT-60 |
Model: |
Industry: |
Plastic factory |
|
Cooling equipment: |
Chiller, Mold, Materials tube, Oil cooler |
||
Condition: |
1. 15 injection machines (90 - 350 ton) 2. The old closed type cooling tower can't do maintenance by its design 3. Heat exchanger and filler clogged with limescale 4. To solve by SCT-30, SCT-45 |
Model: |
Industry: |
Plastic factory |
|
Cooling equipment: |
Chiller, Mold, Materials tube, Oil cooler |
||
Condition: |
1. 14 injection machines 2. Open type cooling tower has serious limescale and trip unexpectedly problrm 3. To solve by SCT-30 |
Model: |
Industry: |
Bicycle manufacturer |
|
Cooling equipment: |
Chiller, Mold, Materials tube |
||
Condition: |
1. 20 sets injection machines (15 servo) 2. To avoid water chiller trip by high temperature and keep clean room environment, hence they start to use closed circuit cooling tower SCT-30 and SCT-60 |
Model: |
Industry: |
Motor accessory |
|
Cooling equipment: |
Chiller, Mold, Materials tube, Oil cooler |
||
Condition: |
1. 13 sets injection machines 2. Materials tubes jackets were full with limescale, it effects product quality and not easy maintain 3. To solve by SCT-45 |
Model: |
Industry: |
Cosmetic container |
|
Cooling equipment: |
Chiller, Mold, Materials tube, Oil cooler |
||
Condition: |
1. 20 sets injection machines 2. Open type cooling tower makes limescle problem was very serious 3. To solve by SCT-30 |
Model: |
Industry: |
Bicycle, Motorcycle and Car accessory |
|
Cooling equipment: |
Chiller, Mold, Materials tube, Oil cooler |
||
Condition: |
1. 30 injection and extrusion machines (120 to 350 ton) 2. Open type cooling tower (200 RT), connects with underground pool by two water loops 3. Injection machine clogged with limescale 4. Cooling tower is too big to limescale 5. Water of pool was polluted 6. To solve by SCT-30 |
Model: |
Industry: |
Plastic factory |
|
Cooling equipment: |
Chiller, Mold, Materials tube, Oil cooler |
||
Condition: |
1. 40-year experience in plastic industry 2. 23 injection machines 3. Limescale problem 4. To replace with new cooling water system by closed circuit cooling tower when whey build up new factory |